Excerpt from The Annual Bulletin of the Beach Erosion Board Office, Chief of Engineers, Washington, D. C, Vol. 14: July, 1960 The techniques by which activated material could be monitored in the laboratory are basically twofold: in situ measurements and laboratory measure ments of samples taken from the test area. A sampling program is feasible for laboratory studies but such a program becomes enormously expensive if pursued during a field test. Consequently, it is desirable to design laboratory studies which utilize in-place measurements extensively and to supplement these measure ments with a sampling program. The design of field applications would of course minimize the use of sampling. In this fashion it will be possible to gain valu able experience from laboratory studies which may be applied to field techniques when working in a littoral environment. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
